Singxer SDA-2 DAC NOS Native decoding DSD512, AK4497 Decoder Headphone Amplifier
Get 5 points for every eligible dollar you spend on products.
The program is free. Become a SHENZHENAUDIO member and you'll join automatically. After joining the program, you'll receive points as soon as your order ships. Accumulated points is applied the next time you shop at shenzhenaudio.com. It's that simple.
Click here for more information on the program.
There are two versions of SDA-2, the standard version and the advanced version. The other parts of the two versions are the same. The high version is especially suitable for USB-based users. It is recommended to use USB-based users.
The SDA-2 decoder is a high-performance HiFi-class audio decoding amp preamplifier. It uses XMOS's latest xCORE-200 series chip as the USB Audio solution, and uses the AKM497 of the AKM third-generation DAC as the DA conversion chip, AK4118 as a digital audio input receiver chip, uses STM32 as the control of the whole machine, Xilinx's large-scale FPGA as the processing of the clock system and digital audio stream. The amp part adopts 4-way full balance design, independent discrete class A amp drive circuit; the front stage output adopts analog pre-stage design, which is not the way of digital attenuation affecting sound dynamics; has rich input and output interfaces, including standard USB2 .0 input interface, SPDIF coaxial and AES balanced input, analog XLR balanced output, analog RCA output.
PCM supports up to 384Khz, DSD uses native direct solution technology, supports up to DSD512, and all interfaces support DSD decoding.
The DAC chip adopts AKM's flagship DAC AK4497EQ; the DSD adopts the native direct solution mode. The DSD digital stream does not pass through the internal digital filter and modulator, and works in the NOS mode. The PCM can also choose to work in the NOS mode, which is in line with the HQPlayer design concept. .
SDA-2 is the first decoding amp preamp product we developed, mainly using the following four main technologies:
1, USB part uses our first generation isolation technology: SCIT technology (Singxer capacitor isolation technique), SCIT technology is a full isolation technology (ground isolation), high-speed signal using 150Mbps isolation chip, low-speed signal using optocoupler isolation It can completely isolate the interference from the PC; the USB version of the high version can basically reach the level of the SU-1 independent digital interface.
2, source synchronization technology and FPGA shaping technology, re-shaping the isolated I2S signal; thus eliminating the additive jitter caused by the isolation chip;
3, The self-developed clock system uses a femtosecond crystal oscillator as the local reference clock;
4, 4 way class A discrete amp circuit, full balanced amplification of 8 chip transistors per route.
Sample rate supported by each input interface:
DSD: 2.8 MHz (DSD64) - DoP,native
5.6 MHz (DSD128) - DoP,native
11.2 MHz (DSD256) - DoP,native
22.5792 MHz (DSD512) - native
Bit width: Up to 32 bit over I2S output
Up to 24 bit over S/PDIF
Electrical standards for each interface:
1, USB input socket is a standard USB-B type female socket, USB power supply range is 4.5V-5.1V;
2, SPDIF interface input standard S / PDIF signal, input impedance is 75 ohms, AES input impedance is 110 ohms;
3, the power input is 115V/ 230V AC, and the internal 30W O-type transformer is used for power supply;
4, I2S input is LVDS level in the form of HDMI interface, compatible with SU-1 interface;
Analog output performance:
Output level (0dBFS):
PCM: RCA single-ended output is 2V RMS, XLR balanced output is 4V RMS
DSD: RCA single-ended output is 1.8V RMS, XLR balanced output is 3.6V RMS
Output impedance: 22 ohms (RCA single ended) / 44 ohms (XLR balanced)
Frequency response: 20-20kHz +/-0.2dB
Signal to noise ratio: 125dB
THD+N (1kHz, 0dBFS) 0.00025% at fs=44.1Khz (PCM)
THD+N (1kHz, 0dBFS) 0.00030% at DSD256
Dynamic response (1kHz, -60dBFS) 125dB
Left and right channel separation >125dB
Balanced output noise floor: 2.2uv RMS
Amp balance maximum output power 3480mW@30Ω, 0dBFS
Distortion of the amp balanced output, 0dBFS, fs=44.1Khz (PCM)
75Ω load THD+N -105dB
600Ω load THD+N -110dB
1. Very clean 1K FFT with only 2-5 harmonics, no high harmonics and other spurs
2. Ultra low noise floor, about 2.0uv
3.20-20k frequency response, very straight
4.Excellent distortion performance, THD+N sweep test keeps the whole frequency band below 0.00033%
5. Excellent signal to noise ratio, measured SNR at 125.6dB
6. Rapid dynamic response, DNR reaches 126DB
1, Windows 7, Windows 8, Windows 10; 32/64 bit, need to install a dedicated driver
2, Native MacOS 10.6 and later, using the system comes with a driver
3, Native Linux with UAC2 compliant kernel, using the system's own driver, (tested on Ubuntu and Daphile systems, based on INTEL X86 platform)
4, Android OS 4.2 and above, the device needs to support OTG function, in general, the Android 5.0 system is supported by default, and the following 5.0 recommendations are used with a dedicated player.
The I2S interface is input using an HDMI socket:
1. LVDS differential signal with a level of 3.3V;
2. The I2S interface is compatible with multiple I2S output signal definitions, and the FPGA has built-in PCM/DSD signal automatic identification algorithm;
3. The DSD ON signal can also be defined by itself. The DSD ON signal can be input to the PIN13, 14, 15, and 16 pins of the socket.
4. The phase of PIN1-3 and PIN7-9 is adjustable, and the user can configure the phase of the two pairs of outputs through one switch.
The SDA-2 can be configured with SW switches to accommodate different I2S standards.
Chassis size and packaging:
The length and width of the chassis: 262MM*220MM*46MM, excluding the height of the feet and the protruding part of the connector behind the chassis.
The weight of a single machine is about 3KG.
The length and width of the carton packaging: 330MM*310MM*110MM.
Shipping package weight: about 3.4KG
Accessories: a USB cable and a power cord
Worldwide Free Shipping on SHENZHENAUDIO, Please allow 1-3 business days for conduct Quality Control in order to ensure the products quality.
If a customer would like the order reshipped, they’ll be charged a reshipment fee. Customers may also be subject to a restocking fee of up to 20 percent of the product cost.
Which Couriers To Use?
Given the amount of shipping partners we work with and the vast coverage area we serve, there are likely regions with much longer transit times than others. If you have any feedback, suggestions, or problems with the courier of your shipment, please feel free to submit a support ticket via the "Contact Us" button below.
Our goal is to provide our customers with the best shipping experience possible at a reasonable cost. This is why we constantly negotiate with existing shipping partners for lower rates and actively test new couriers for potential opportunities.
PO boxes or APO/FPO
The ability to ship to PO boxes or an APO/FPO address depends on the item's weight. If an item weighs more than 9 pounds, we won’t be able to ship to these addresses because of our current courier agreements.
To determine if your order is eligible for shipment to PO boxes or an APO/FPO address, please contact SHENZHENAUDIO Support.
Estimated Delivery Time
For customers in the continental United States:
5 to 14 business days from the date of shipping
For customers in Hawaii and Puerto Rico:
2 to 4 weeks from the date of shipping
International customers can expect longer shipping times, depending on the country in which they live:
Canada: 1 to 3 weeks from the date of shipping
Australia, New Zealand, Germany, France, and the UK: 2 to 4 weeks from the date of shipping
Other countries not listed above: 3 to 6 weeks from the date of shipping
Please keep in mind that these are rough estimates and shipments can be delayed due to unforeseen circumstances, like postal strikes or severe weather.
If, for some reason, you don’t receive your order within the estimated time frame provided above and suspect that it might be lost in transit, please submit a support ticket from your transactions page and we can look into the order with the courier. Lost-in-transit requests must be submitted to SHENZHENAUDIO Support within 4 months of the date of shipping or before the courier archives the tracking information.
Easy 30-Day Return Policy
If you are dissatisfied with your purchase for any reason, you may return it to SHENZHENAUDIO within 30 days of the received date, subject to the conditions and exclusions below.
Please read conditions below. If all conditions are not met, SHENZHENAUDIO reserves the right to refuse the return. All returned items must be in new condition, in their original unaltered box (including an intact UPC code) and must include all packing material, blank warranty cards, manuals and accessories. SHENZHENAUDIO can only refund the original purchase price. Shipping and handling fees are nonrefundable.
Defective or Damaged Items
Defective items may be repaired, exchanged or refunded at our discretion for the same model or manufacturer's equivalent model.
Depending on where you live, the time it may take for your exchanged product to reach you, may vary. Please allow 3-5 business days for mail-in exchanges to be processed.
Refunds & Credits
Once we receive and inspect your item(s), we will credit your account. Please allow 5-7 days for a credit to appear on your account. In most cases, we will issue your refund in the same way you made the original purchase. Please note: we can only refund the original purchase price. Shipping and handling fees are nonrefundable.
You will be responsible for paying for your own shipping costs for returning your item. Shipping costs are non-refundable. If you receive a refund, the cost of return shipping will be deducted from your refund.
ShippingTo return your product, you should mail your product to: 4F 405, Building F, No.2 Shangxue Science and Technology North, Bantian Street, Longgang Dist, ShenZhen, 518129 Guangdong, China
If you’ve done all of this and you still have not received your refund yet, please contact us at email@example.com.